Strands
Line
bushings are used to electrically connect equipment in potentially
explosive atmospheres. The connection is always established either
between a flameproof enclosure and an enclosure of another type of
protection in accordance with DIN EN 60079-0. Alternatively, two
flameproof enclosures are connected. Thus cables are protected from
direct contact
Varying with the design, line bushings can be used in intrinsically
safe, measuring, control or energy circuits
By
the definition of the threads on adaption to a standard enclosure is
very easy.
Standardized the threads are M10
bis M42, variation on this must be approved by a notified
body in the case of Ex application.
Very often the screwable line bushings are used to
connect the 'increased safety' enclosure with a
'flameproof d-' enclosure
With that there is a direct connection between increased safety
enclosure and flameproof d enclosure.
Flexibilty of the solution for your application
Cable
The
use of screwable line bushingswith unilateral cable is often
used
with a flameproof encapsulated enclosure, where the increased safety
enclosure is separated from the d-enclosures. This is frequently used
in measuring
devices, transducers and data lines.
Our
Kow How for your efficency!