Skip to main content.

Frostprotection with preassembled heating tape ILL with temperature control

Do you have a frost-exposed water line?

Plugable assembled heating circuits at our webshopwebshop  

pre assembled heating circuit with ILL heating tape If you have any questions, use our 'Live Support' - simply hit the online button in the left navigation bar. Write your question. We will reply immediately!!!


Here you will find a video instruction for pre assembled heating tapes at youtube >>





It can be significant damage caused by burst water pipes emerge. This remedy is quite simple: An antifreeze heating tape along the line, a standard isolation (as thick as the pipe diameter, preformed from the home depot), a power line with a plug together with an integrated thermostat and no more freezes or even burst.

The system of QUINTEX works that way!
Tell us the length you need, we provide the heating with thermostat and provide cable, and you can be safe.

or:
You can preassembled heating circuits buy directly in the web shop (heating + thermostat within the 3m cable + cable + plug) The allocation length is between 1m-10m in 1m intervals, from 10-20m in 2m intervals. We manufacture in any length on request - no extra charge. That is the webshop page: preassembled heating circuits



or:
You buy the individual the heating components in the web shop. If you need help, inform us (you may request our recall in our webshop comfortable and free) That is the webshop page: Individual components for heating circuits .
or:


Simply to install, high protection for your house   

^Top

Condensation prevention with heating tapes ILL

Beautiful views, even in winter       

A journal article on condensation at Schueco(a german manufacturer of windows)!winter garden with dange of condensation without heating tapes

Condensate may also refer to the inside of glass surfaces on windows or
other cold surfaces of a space form. We speak here of condensation -
or condensation formation. If no adequate ventilation, floor stains and
mold on the walls are the result.

The reason for the condensation is that air is can only a certain amount of
moisture absorbs. If this condition is fulfilled one speak of saturated air.
This device is now "water-loaded air" in the winter to a cold surface - for example, the
Interior window washer - then the water vapor condenses and is reflected as a visible
Lower water. The condensation on the inner window pane, therefore if
the room humidity is relatively high and the surface temperature at the
Inner disk is comparatively low.

Often cold window panes, because the flow of heated air. Particularly "vulnerable" for
the condensation on the windows inside windows are older, because they have the inner
Disc due to defective insulation auskühlt easily.

    Even in winter it is beautiful in the 'winter' garden
Of course you do not wish to behind foggy windows
This will help the heating of the company QUINTEX:
a 23 watt / m band creates easy remedy here .. The warm upwar streaming air
prevents condensation
reliable.
 
The compilation of the components could be make in
Webshop.

You buy the individual the heating components in the web. If you need help, inform us (you may request our recall in our webshop comfortable and free)

Beautiful views with us