---

Ambient temperature controller       

The ambient thermostats series IRM1/IRM2  are characterized in particular by its compact design and its excellent cost/performance relationship. The use of these thermostats is essentially as an ambient thermostat thought. The size of this Theromstate makes it possible to integrate it if necessary into the  power supply cable of heating circuit t. Of course, it is also simple to screw the thermostat, which is integrated into a M20 thread lonto a connection box and preassembling the terminals. It is thus possible to swoich on the heating circuit at a temperature below 4 ° C. Thus, it is now easy and inexpensive to build up a safe antifreeze system . The switching to antifreeze will never be forgotten.

Minithermostat IRM1/IRM2Ex:
in plastic-/metall  thread M20, 
On 4°C;Off  11°C
switiching capacity 16A, 250V

Also as an-Version applicable

                              Safety for your process


Non-Ex ambient temperature controller in our webshop
ambient temperature controller in our Webshop



^ Top

Capillary thermostat

The capillary thermostats have been reliable electrical systemin trace heating for many years. To cover a wide temperatur range it is neccessary to adapted capillary. Quintex has therefore proposed a series of capillary thermostats in its portfolio. the benfir of a cappilary system it the direct switching without any further voltage. With our connections sets for heating systems, you can connect directly at the thermostat, even in hazardous areas. In the non-Ex version the switching capacity of 25 A conscious has been increased to reduce the number of heating circuits

Also as an-Version applicable








 
Thermostat specification für Non Ex- Thermostats 25 A, 250V

Type	IRM40	IRM200	IRM320
Temperature range	0°C-40°C	0°C-200°C	50°C-320°C
Switching hysteresis	+/- 6K	+/- 6K	+/- 12K
Switching accuracy	+/- 3K	+/- 5K	+/- 5K
Max. Sensor temp.	45°C	230°C	350 °C
Min. Sensor temp.	-20°C	-20°C	-20°C
Capillary length	1,6 m	1,6 m	1,6 m

Non Ex capillary thermostat in our Webshop



Thermostat specification for - Thermostats 16A, 250 V

Type	IRMEx120	IRMEx200	IRMEx50300
Temperature range	0°C-120°C	0°C-200°C	50°C-300°C
Switching accuracy	+3,5K	+ 10K	+ 12,5K
Max. Sensor temp.	130°C	230°C	345 °C
Min. Sensor temp.	-10°C	-10°C	-10°C
Capillary length	1,0 m	1,0 m	1,0 m

Ex capillary thermost in our Webshop

                           Economical applications by suitable controlsystems!

^ To Top

Capillary limiter

If constant heating systems (zone heaters, plastic-, minerlinsulated cable) in hazardous areas be applied, it is often necessary to use a limiter to avoid an overtemperature for the defined Ex Zone and temperature class.
It is important, because it is a security matter, that even if the limiter has own failures it safely switch off (fail-safe)

All Quintex limiters are approved for use in -Zones








Thermostat specification limiter IBMEx

Type	IBM200Ex	IBM50300Ex	IBM130190Ex T3/ T4
Temperature range	0°C-200°C	50°C-300°C	130°C-190°C
Switching accuracy	-10K	- 12,5K	- 10K
Max. Sensor temp.	230°C	345°C	>230 °C
Min. Sensor temp.	-10°C	-10°C	-10°C
capillary length	1.0 m	1.0 m	1.0 m

Ex capillary limiter in our Webshop



                     Be safe

^To Top

Electronic Controller

Electronic controllers can be used universal in the field of electrical trace heating. The general use of PT 100 sensor ensures an accurate measurements within a temperture range of - 50 ° C up to 600 ° C . By programming can be added free alarm points, which you use as early response of a possible malfunction, so that thers is time on site to have a look at the system.








Technical Data

Voltage                              95-240 VAV ± 10%
switchung capacity             1 x change over 16A, 1 x change over 8A
Range        :                       -200 °C bis 800°C 
Sensor:                               PT100 three wires technology(for Ex with approval)
Output:                               4-20mA actual temperature output
Dimension(WxHxD):            70 x 85 x 61        
Mounting :                           DIN rail TS35


If the Sensor is build up as an -construction( e.g. Ex e approved) you can use the controller even as non intrinsic safe controller for hazardous areas.

Electronic controller in our Webshop



Intrinsically safe controller and limiter for use in  areas

         

3- wire technology for non ex PT100, with temperature display

Technical Data:
Controller                                                                   Limiter:

Voltage:                        230 VAC                           24-265VAC
switchung capacity:    2 x change over 3A                1 x nc  6A
Range:                      -99°C bis 460°C                   -99°C bis 460°C
Sensor:                    PT100 3-wires                       PT100 3-wiresr
Approval:              TÜV00ATEX 1579                   TÜV08ATEX554381

Electronic controller in our Webshop
 

                Precision for your process!

^  Top